Skip to product information
1 of 11

Simms

REBUILD SERVICE FOR ALL LUCAS SIMMS MINIMEC 4, 6, and 3 Cylinder DieselPumps

REBUILD SERVICE FOR ALL LUCAS SIMMS MINIMEC 4, 6, and 3 Cylinder DieselPumps

Regular price $1,065.00 USD
Regular price Sale price $1,065.00 USD
Sale Sold out
Taxes included. Shipping calculated at checkout.
ALTAMONTE DIESEL 

Located in Altamonte Springs Central Florida

We can be contacted at any time through eBay messages if you have any questions, comments or product requests. We will respond to you within 24 hours and do our best to help you out! We encourage our customers to contact us with any questions or concerns! We'd like to be sure you are completely satisfied with your purchase.


REBUILD SERVICE FOR ALL 

SIMMS MINIMEC 4, 6, and 3 Cylinder Diesel Pumps.

!!!!! THIS IS A REBUILD SERVICE FOR YOUR 

SIMMS MINIMEC 

INJECTION PUMP PLEASE SEE BELOW

 INSTRUCTION ON SENDING YOUR PUMP IN TO BE FIXED AND RETURNED  !!!!!!!!


 This listing is for SIMMS MINIMEC 4, 6, and 3 Cylinder inline injection pumps.





THIS IS A REBUILD SERVICE 



PLEASE SEND US THE PUMP THAT NEEDS TO BE REBUILT

TO 

ALTAMONTE DIESEL
ATTN: SERVICE/EBAY
5222  SAILWIND CIRCLE
ORLANDO, FL 32801

OUR PRICE IS FOR A STANDARD REBUILD
HERE ARE SOME CONDITIONS THAT MAY CHANGE THE REBUILD PRICE

If your part is an injection pump, it cannot be seized, meaning the drive shaft should rotate two full turns.
It has been in an engine fire.
It has already been Disassembled by a customer or other injection shop. (some exceptions apply)
It Cannot have broken housings or No broken "Dog Ears" meaning broken mount fittings.
Any electronic components/connectors must not be broken.
EXCESSIVE RUST

ANY OF THESE CAN RAISE THE FINAL COST OF THE REBUILD.
We will contact you if there will be additional charges before we proceed. 
After the eBay listing is paid for, we will need your old pump(core) shipped to us. Be sure to send your shipping address for the return of your rebuilt items, your phone number, and your email address so we have multiple ways to contact you.

Timeframe to rebuild and update your part is no more than 2 to 4 business days for a normal rebuild. Seized Head and rotor or hard-to-obtain nozzles for your injectors could add more Time/Price to completion.
for injection pumps If you can turn the shaft and it's not frozen then most likely, it's fine. A new head and rotor or plungers would not be included in the price of a regular rebuild. We will let you know if we do run into issues, and we will contact you before proceeding further.
After your part is ready, we will cover shipping the pump or injectors back to (you) at the address specified. MORE INSTRUCTIONS AND OUR SHIP-TO ADDRESS PROVIDED AFTER WE RECEIVE PAYMENT FOR THE LISTING.

FEEL FREE TO CONTACT US THRU EBAY IF YOU HAVE ANY QUESTIONS.



Our Service Includes a
12 MONTH UNLIMITED MILEAGE WARRANTY.
DIESEL SPECIALISTS INC.
LIMITED WARRANTY POLICY

Diesel Specialists Inc., hereafter mentioned as DSP, issues the
following warranty on all DSP product. This warranty is extended to the
original purchaser of the product only, unless approved of in writing by DSP.

Our product is warranted to be free from defects in material or workmanship
under normal use and service, for a period of (1) one year from the original
purchase date. The obligation of DSP under this warranty is limited to the
repair or replacement of the defective unit. Repair or replacement of the unit
shall be at the sole discretion of DSP. The defective unit must be returned
within 30 days of the failure date to be considered for warranty.

Any product that is not installed according to the manufacturers guidelines is 
not covered under any warranty by DSP.

This limited warranty is in lieu of all other warranties, either expressed or
implied. All obligations or liabilities of DSP are expressly disclaimed, including
claims for R & R expenses, liability of consequential damages, down time, loss
of revenue, or any other inconvenience cost.

Our product is intended to be installed by the purchaser of DSP product. Any 
damage or defect caused by a third party installer is the sole responsibility of 
the original purchaser of the product. In addition, DSP is not responsible for 
any R & R expenses, liability of consequential damages, down time, loss of 
revenue, or any other inconvenience cost relative to third party installers of 
our product.

DSP assumes no liability or responsibility for pump failure that are the result of 
the use of fuels and/or additives not approved by the original manufacturer of 
the engine and/or vehicle.

This warranty does not apply to any part or unit that has been altered or
repaired by anyone other than DSP. Nor, to any product which has been
subject to misuse, abuse, neglect, accident, improper installation, or damage
from foreign material such as water or dirt. This warranty will only be honored
at the facilities of DSP.  




International Buyers – Please Note: 

A. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility.

B. Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.

C.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up – do not confuse them for additional shipping charges.


View full details